Emerson Rosemount 3095FB MultiVariable MODBUS Quick Installation Manual page 5

Quick Installation Guide
00825-0100-4738, Rev BA
October 2009
S 2
TEP CONTINUED
3. Connect the transmitter to the process.
4. Install the RTD Cable Assembly (optional). All RTD 3095 Cable Assemblies use the
3095 RTD Cable Connector. Identify the cable type being installed and follow the steps
below.
• Installing an Armored Shielded RTD Cable (See Figure 3)
a.Fully engage the black cable connector to the 3095 RTD connector.
b.Tighten the cable adapter until metal contacts metal.
c. Install the compression fitting.
d.Tighten the cap onto the compression fitting.
Figure 3. Armored Shielded RTD Cable
Compression Fitting
Connect
to RTD
3 / 4 to 1 / 2 -14 NPT Adapter
...
Conductive Bushing
RTD Cap
Washer
Rosemount 3095FB
Black Cable Connector
Cap Cable Adapter
Bushing
Compression Fitting
5