Emerson Rosemount 3095FB MultiVariable MODBUS Quick Installation Manual page 6

Rosemount 3095FB
S 2
TEP CONTINUED
• Installing a Shielded 3095 RTD Cable (See Figure 4)
Note: Shielded cable is intended for use in a conduit.
a.Fully engage the black cable connector to the 3095 RTD Connector.
b.Tighten the cable adapter until metal contacts metal.
Figure 4. Shielded RTD Cable
• Installing a ATEX/IECEx Flameproof 3095 RTD Cable (See Figure 5)
a.Fully engage the black cable connector to the 3095 RTD Connector.
b.Tighten the cable adapter and cable gland until metal contacts metal.
Figure 5. ATEX/IECEx Flameproof RTD Cable
5. Check all process connections for leaks.
6. Connect the appropriate wiring (see Step 5). Ground the transmitter according to
national and local electrical codes. Install field wiring grounding (optional).
6
...
RTD Cable Gland CM20
Quick Installation Guide
00825-0100-4738, Rev BA
1
Cable Adapter / 2 –14 NPT
Black Cable Connector
Cable Adapter
Cable Gland
Black Cable Connector/ RTD Connector
October 2009