Step 1: Mount The Transmitter - Emerson Rosemount 3095FB MultiVariable MODBUS Quick Installation Manual

Quick Installation Guide
00825-0100-4738, Rev BA
October 2009
S 1: M
TEP OUNT THE
Liquid Flow Applications
1. Place taps to the side of the line.
2. Mount beside or below the taps.
3. Mount the transmitter so that the drain/vent
valves are oriented upward.
Gas Flow Applications
1. Place taps in the top or side of the line.
2. Mount beside or above the taps.
Steam Flow Applications
1. Place taps to the side of the line.
2. Mount beside or below the taps.
3. Fill impulse lines with water.
Figure 1. Using a Mounting Bracket
Panel Mount
(1) Panel bolts are customer supplied.
T
RANSMITTER
(1)
Rosemount 3095FB
Flow
Flow
Flow
Pipe Mount
Flow
3