The AEG WiFi Stick is released from factory in AP mode. It can be connected with the 485 communication interface of
inverters and can be operated over computer or mobile software.
6.3.2 Remote Monitoring and Local Monitoring; the AEG InverterControl App and Portal
There are two modes with which the AEG WiFi Stick allows you to monitor your inverter: Remote monitoring and Local
Remote Monitoring allows you to monitor your AEG inverter from any place you have a mobile internet connection.
Monitoring takes place via mobile (via the AEG InverterControl App) or via PC (via the AEG InverterControl Webportal).
Local Monitoring allows you to connect directly to one individual inverter without using an internet connection. As you
connect directly to the inverter, you will not be able to monitor its data when you lose connection to it. (e.g. when you
leave the house).
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
Half duplex mode
Supports data exchange between RS485 - WiFi interface
Meets the 802.11 b/g/n wireless standard
Wireless network AP/STA
Security mechanism WEP/WPA-PSK/WPA2-PSK/WAPI
Barrier-free transmission distance 100 m
TCP Server, TCP Client, UDP mode and UDP Server mode
Operation interface, target IP address and interface can be set in random
Disconnect automatically after network disconnection, ensures reliable TCP
connection of the whole network
Supports TCP/IP/UDP network protocol stack
IE configuration interface
Operation mode, Transparent data transmission or agreement transfer mode
Input power supply: 5VDC~12V/170mA~300mA ; powered directly by
Working temperature: -20~70°C
Working humidity:10%-90%RH (no condensation)
10. Storage temperature: -40-80 °C
Storage humidity: 5%-90%RH (no condensation)
12. Other frequency: 20MHz, 40MHz and automatic
Table 23: AEG WiFi Stick features