Mode Settings; Grid Selection - AEG AS-IC01-2 Series Installation Instructions Manual

44

5.4.8 Mode settings

The default mode of series grid-tied solar inverter is "independent"; however, if the current of solar modules are joined
into the inverter as figure 26 shows, it is necessary to switch the mode to "parallel". Please refer to section 5.4.4 for de-
tailed settings.
Solar modules

5.5 Grid selection

After powering up the inverter by DC input for the first time or after restoring factory settings, the LCD screen will
show the following message:
and a list of countries will be displayed (as in Figure 28).
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
DC convergence (lighting) box
FU
SPD
Figure 26: 'Parallel' input mode
S O L A R I N V E R T E R
I n i t i a l i n g ... ... W a i t i n g
> > > > > > >
Figure 27: Initialization
C o u n t r y : U n s e t
Germany G r e e c e
U K D e n m a r k
A u s t r a l i a H o l l a n d
Figure 28: Country list
QF
Track A
C o u n t r y : U n s e t
G r e e c e C h i n a
D e n m a r k T h a i l a n d
H o l l a n d Other
Inverter
Track B
Line splitter
44