Download Print this page

Dimensions And Weight; Installation; Unpacking Inspection - AEG AS-IC01-2 Series Installation Instructions Manual

Three-phase grid-tied solar inverter 12 kw to 30 kw
Hide thumbs

Advertisement

15

2.5 Dimensions and weight

Below is an overview of the dimensions and weight of the products in series AS-IC01-2 up to 30 kW. Technical specifica-
tions are subject to change without previous notice. Please refer to the related product datasheet which you can also
find under
www.aeg-industrialsolar.de
AS-IC01-12000-2 / AS-IC01-15000-2/ AS-IC01-17000-2
AS-IC01-20000-2 / AS-IC01-25000-2/ AS-IC01-30000-2

3. Installation

The following section describes how to install and connect the inverter to the grid-tied solar system.
Please ensure that all installation requirements are met before installation. Only qualified electricians are allowed to
install the inverter.

3.1 Unpacking inspection

When unpacking the product ensure that:
1.
The inverter unit or to the package show no damage;
2.
The operation manual, port and installation accessories are found in the package;
3.
No damage or loss has occurred to the items in the package;
4. The product type stated in your order corresponds to the one stated on the product label.
Should you find any problem, contact the shipping company or your supplier promptly.
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
> Service > Product Datasheet for the latest information.
Figure 6: Product Height (H), Width (W) and Depth (D)
Model
Table 5: Dimensions and weight of the products in the AS-IC01-2 series up to 30 kW
H
W
D
(mm)
(mm)
(mm)
610
480
230
660
520
250
Net
weight
15
(kg)
36
53

Advertisement

loading

  Also See for AEG AS-IC01-2 Series

  Related Manuals for AEG AS-IC01-2 Series