3.4 Electrical installation
This section illustrates the detailed electrical installation and related safety instructions for AEG inverter series AS-IC01
3.4.1 Connection of solar modules
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
Figure 12: Block diagram of a grid-tied solar system
Improper operation during the wiring process can cause fatal injury to the operator
or unrecoverable damage to the inverter. Only qualified personnel can perform
the wiring work.
All electrical installations must be in accordance with local and national electrical codes.
All cables must be firmly attached, undamaged, properly insulated and
Read and follow the instructions provided in this section while observing all safety warnings.
Always note the rated voltage and current defined in this manual. Never exceed the limits.
Figure 13A: Connection between DC connector and solar modules
AEG solar inverter
Public electric grid