Table of Contents
Advertisement
42
Interface
WiFi interface
Others
The AEG WiFi Stick is released from factory in AP mode. It can be connected with the 485 communication interface of
inverters and can be operated over computer or mobile software.
6.3.2 Remote Monitoring and Local Monitoring; the AEG InverterControl App and Portal
There are two modes with which the AEG WiFi Stick allows you to monitor your inverter: Remote monitoring and Local
Monitoring.
Remote Monitoring allows you to monitor your AEG inverter from any place you have a mobile internet connection.
Monitoring takes place via mobile (via the AEG InverterControl App) or via PC (via the AEG InverterControl Webportal).
Local Monitoring allows you to monitor your AEG inverter through your home WiFi (WLAN). Monitoring takes place via
mobile (via the AEG InverterControl App). Local Monitoring only works within the signal reach of your WLAN.
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
Parameters function
5.
Flow indicator
6.
Half duplex mode
1.
Supports data exchange between RS485 - WiFi interface
2.
Meets the 802.11 b/g/n wireless standard
3.
Wireless network AP/STA
4.
Security mechanism WEP/WPA-PSK/WPA2-PSK/WAPI
5.
Barrier-free transmission distance 100 m
1.
TCP Server, TCP Client, UDP mode and UDP Server mode
2.
Operation interface, target IP address and interface can be set in random
3.
Disconnect automatically after network disconnection, ensures reliable TCP
connection of the whole network
4.
Supports TCP/IP/UDP network protocol stack
5.
IE configuration interface
6.
Operation mode, Transparent data transmission or agreement transfer mode
7.
Input power supply: 5VDC~12V/170mA~300mA ; powered directly by
the inverter
8.
Working temperature: -20~70°C
9.
Working humidity:10%-90%RH (no condensation)
10. Storage temperature: -40-80 °C
11.
Storage humidity: 5%-90%RH (no condensation)
12. Other frequency: 20MHz, 40MHz and automatic
Table 23: AEG WiFi Stick features
42
Hide quick links:
Advertisement
Table of Contents
