Electrical Installation - AEG AS-IR01 Installation Instructions Manual

20
Installation steps of single-phase inverter:
1. If the installation brackets are still fastened to the inverter unit, remove the installation brackets from the
inverter unit and remove the M5 hex socket cap screws. Locate the installation holes with the installation
bracket;
2. Use the expansion bolts to fix the installation bracket at the proper location of the walls;
3. Lift the inverter to suspend it on the installation bracket through M8 hex socket cap screws;
4. Finally, fasten the M5 screws connecting the inverter with the bracket. For firm installation, the operators
cannot release the device until the inverter is installed on the bracket firmly.

3.4 Electrical installation

This section illustrates the detailed electrical installation and related safety instructions for AEG inverter series AS-IR01
and AS-IR01-2.
Solar modules
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
Figure 11: Installation bracket of 4000 W to 5000 W inverters
AEG solar
QF
inverter
SPD
Figure 12: Block diagram of a grid-tied solar system
QF
Net
QF
meter
SPD
Communication
converter
20
Public
electric grid
Monitoring
equipment