Group Control - Gree CE52–24/F(C) Owner's Manual

Centralized Controller
All-Control Function can operate all indoor units as below：
(1)ON/OFF
Press ON/OFF button to turn on or turn off all units.
When turning off the unit, the setting for mode, temperature, fan speed and swing
is unavailable.
(2)Mode setting
Press mode button to set operation mode.
(3)Temperature setting
Press UP or Down button to adjust temperature. Press this button once to increase
or decrease temperature 1℃. Press or hole this button and the temperature will
increase or decrease continuously.
(4)Fan speed setting
Press or drag the sliding bar of fan speed to set fan speed.
Note: Fan speed defaults at low speed under drying mode and it can't be adjusted.
(5)Swing setting
Press "left&right" swing or "up&down" swing button to turn on or turn off swing
function.
(6)Send order
Press button
5.5

Group Control

On the homepage, press
Figure 5-4 All-Control Page
to send out the All-Control order.
to enter into the page of group function.
18