Swing Setting; Remote Shield Function; Child Lock Function; Gate-Control Function - Gree XK49 Owner's Manual

Wired Controller XK49
③
If indoor unit's fan speed is set auto, indoor unit will change fan speed
automatically according to room temperature in order to make the room
temperature more stable and comfortable.

4.5 Swing Setting

Under unit on, press SWING button to activate or cancel Swing function. The icon
" " lights up when Swing function is activated.

4.6 Remote Shield Function

Remote Shield Function: Remote monitor or central controller can disable the
relevant functions of wired controller so as to realize the function of remote control.
Remote Shield Function includes all shield and partial shield. When All Shield
function is on, all controls of the wired controller are disabled. When Partial Shield
function is on, those controls that are shielded will be disabled.
When the remote monitor or central controller activates Remote Shield on the
wired controller, "
controller, "

4.7 Child Lock Function

When unit is turned on normally or turned off, pressing "
together for 5 seconds will turn on Child Lock function. "
Pressing " " and "
All the other buttons will be disabled when Child Lock function is on.

4.8 Gate-control Function

When there is Gate-control System, user can insert a card to turn on the unit or pull
off a card to turn off the unit. When the card is re-inserted, the unit will recover the
operation as state in memory. When the card is pulled off (or improperly inserted), "
icon will show. neither remote control nor operation of wired controller will be effective
and icon " " will be flickering.

5. ERROR DISPLAY

When there occurs any error during operation, the temperature display zone on the
wired controller will show error codes. If several errors happen at the same time, error
codes will show on the display repeatedly.
Note: If error occurs, please turn off the unit and send for professionals to repair.
" icon will show. If user wants to control through the wired
" icon will blink to remind that these controls are disabled.
" together again for 5 seconds to turn off this function.
19
" and "
" will show on the display.
" button
"