(6)In step ⑥ pull out the wire connecting the touch screen and controller's rear cover.
Put the touch screen on a safe place.
(7)In step ⑦, connect the communication cords to G1, G2 terminals, and connect the
neutral wire and live wire to the N, L terminal; connect the ground wire to position
on the electric box rear cover
(8)In step ⑧, locate the controller's rear cover onto the electric box rear cover with
screw ST4.2×9.5 TC.
(9)In step ⑨, connect the wire between touch screen and controller's rear cover.
3.4
Removal Procedure
4 DISPLAY AND WORKING INSTRUCTIONS
Main Page
. Secure it with screw M4×12.
Figure 3-11 Diagram of Removal
Figure 4-1 Main Page
11
Centralized Controller