Omron SYSMAC CS Series Operation Manual page 300

How to Use the Sequence Table Block
Conditions Section
Inputs
Enter input conditions with either of the following formats.
IN (designation)
TBL (block address)
Note Any of the following parameters can be specified as the designation.
• Function block address.ITEM number
• CSV tag name.Tag ITEM
• User Link Table tag name
• Element numbers that have been set in Element Mode and the following status bits
Timer
Counter
The CX-Process Tool's Input Tab Settings
268
HI: Timer completion flag
LO: Pre-alarm occurring
NR: Timing
IO: Stopped
PS: Paused
HI: Counter completion flag
LO: Pre-alarm occurring
NR: Counting
IO: Stopped
Appendix B