Omron SYSMAC CS Series Operation Manual page 210

Simple Example of Use
178
In this example, set as follows:
• Set the operation cycle in the System Common block to 0.5 s
• Set the START mode at power ON to Hot start (1).
ITEM Data description
004 Operation cycle (s)
1: 0.1, 2: 0.2, 3: 0.5, 4: 1, 5: 2
018 Start mode at power ON
1: Hot start, 2: Cold start
3. In CX-Process Tool, select the function blocks to be used (including allo-
cations to block addresses).
Section 4-1
Data range Setting
example
1 to 5 3
1 or 2 1