Omron SYSMAC CS Series Operation Manual page 293

How to Use the Sequence Table Block
Only Rules Column Expanded
LCB05/05D: 100 tables max.
Table number
Table number
Symbol
Condition
32 conditions
signals
max.
Action
32 actions signals
max.
NEXT STEP
Note To expand the number of rules in a table, use the CX-Process Tool and select Expand - Horizontal from
the Operation Menu.
Both Conditions/Actions and Rules Columns Expanded
LCB05/05D: 50 tables max.
Table number
Table number
Symbol
Condition
signals
64 conditions
max.
Action
signals
64 actions
max.
NEXT STEP
Note To expand both the number of conditions/actions and the number of rules in a table, use the CX-Process
Tool and select Expand - Vertical as well as Expand - Horizontal from the Operation Menu.
Table Referencing (LCB01/03/05 Ver. 3.0 or Later)
Overview
The table referencing function enables a main sequence table (called the main table) to reference the evalua-
tion results of the condition rules for a reference destination sequence tables (called the reference table).
This function enables common processing to be placed in reference tables. The TBL command (specifies the
block address of the reference table) is entered as the input signal condition, and Y (input as is) or N (reverse
input) is entered as the rule.
Table number
64 rules max. and 64 steps max.
Rule 1 2
Step 00
THEN To M
ELSE
Table number
64 rules max. and 64 steps max.
Rule 1 2 - - -
Step 00 - - -
THEN To M
ELSE
64
64 max.
64
64 max.
Appendix B
261