ABB ACF5000 Manual page 65

Web page operation
ACF5000 FTIR ANALYZER SYSTEM
Functions
Some functions are only accessible via a web page.
The user has access to the functions
 graphical procedure of the measured value for every measured compo-
nent (see page 67),
 automatic cyclical adjustment check and the export of the QAL3 data
(see page 80),
 Checking for automatic processes with scheduling conflicts
(see page 90).
All other functions are only determined for use by ABB service; they are not
described in this operating instruction.
Access and operation
The Mozilla ® Firefox ® web browser is recommended for web page operation.
The web page is accessed using the analyzer system's IP address via port
8080. Example: If the analyzer system's IP address is 192.168.1.1, then
http://192.168.1.1:8080 must be entered in the address bar of the web
browser.
Only those sub-menus are visible on the web page which can be accessed
with the password entered previously (see page 61).
Note: Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
| OI/ACF5000-EN REV. A 65