ABB ACF5000 Manual page 19

ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 19
NOTICES The gas sensor installed in the analyzer cabinet is not calibrated at the fac-
tory; it is not functional without calibration. The calibration of the gas sensor
is the responsibility of the operator.
Installation, commissioning, parameterization, operation, signal evaluation
and maintenance of the supplied gas warning center are the responsibility of
the operator.
If the above-mentioned instructions are not observed or the hydrogen mon-
itoring of the analyzer cabinet is installed incorrectly, a hydrogen explosion
may occur in the event of a malfunction.