GE Druck ADTS 405 R/F Mk2 Instruction Manual page 59

CONFIGURATION
Key/selection
CONFIG (SETUP + F1)
[UNITS]
[AERONAUTICAL]
[NEXT]
[PREV]
[SAVE]
[PRESSURE]
[NEXT]
[PREV]
[SAVE]
[TEMPERATURE]
[C]
[F]
[LIMITS]
[EDIT LIMITS]
[EDIT EXISTING]
[MAX LIMI T S]
[EDIT NEW]
[CLEAR LIMITS]
[NEXT]
[PREV]
[SEL]
[LOCK AIRCRAFT]
[ON]
[OFF]
[DEFAULT AIRCRAFT]
[NEXT]
[PREV]
[SEL]
© 2015 General Electric Company – All rights reserved.
Hold F1 and press SETUP to enter CONFIG.
Default units
Sele ct default aeronautical units
Step through available units
Step back through available units
Save selected units
Select default pressure units
Step through available units
Step back through available units
Save selected units
Select default temperature units
°C
°F
Change limit values
Change existing values
[NEXT] (aircraft 1 \ aircraft 2...)
[PREV] As NEXT, in reverse order
[SEL] Select aircraft to EDIT limits
NAME \ MAX ALT \ MIN ALT \ MAX CAS \ MIN CAS \ MAX
MACH \ MAX ROC \ MAX RATE
[NEXT] CAS \ MIN Ps \ MAX Ps \ MIN Qc \ MAX Qc \ MAX RATE Ps
\MAX RATE Qc \ ARINC
LIMITS \ ALTITUDE CORRECTION
[PREV] As NEXT in reverse order
[ON/OFF] Switch (tog
data entry Limit value
[ALPHA] Insert alphabet character in name
Nudge up select next letter in alphabet
Nudge down select previous letter in alphabet
[BACK] Delete last character in name
Create maximum limits called "MAX"
Create new limits. As for [EDIT EXISTING][SEL] above
Clear an existing set of limits
(aircraft 1 \ aircraft 2...)
As NEXT, in reverse order
Clear selected limits
[YES] C
[NO]
Only DEFAULT limits available in USER mode
SETUP can be used to select aircraft
(aircraft 1 \ aircraft 2...)
As NEXT, in reverse order
Select aircraft limits used at power-up. May be locked
Testing Aircraft Systems or UUT
Function and comments
of limits
gle) to ARINC 565 limits
delete
ADTS 405 Mk2 Instruction Manual-English | 41