GE Druck ADTS 405 R/F Mk2 Instruction Manual page 24

Chapter 2. INSTALLATION
When using packing materials other than the original, proceed as follows:
1. Wrap unit in polyethylene sheeting.
2. Select a double-wall cardboard container. Inside dimensions must be at least 15 cm
greater than the equipment. The carton must meet test strength requirements of >125 kg.
3. Protect all sides with shock-absorbing material to prevent equipment movement within
the container.
4. Seal carton with approved sealing tape.
5. Mark carton "FRAGILE" on all sides, top, and bottom of shipping container.
Note: For ADTS 405R rack units loose or peripheral items should be placed in a
sealed polythene bag. For ADTS 405F stow the power supply cable, hand
terminal cable and the hand terminal in the ADTS 405F lid. Fit the lid to the
unit.
6 | ADTS 405 Mk2 Instruction Manual-English © 2015 General Electric Company – All rights reserved.