Installation; List Of Parts; Packaging For Storage Or Transportation - GE Druck ADTS 405 R/F Mk2 Instruction Manual

Air data test set
Table of Contents

Advertisement

2. INSTALLATION

Special request
Please keep the special packing boxes so that the ADTS can be safely shipped for calibration, repair
or storage.

2.1 List of Parts

On receipt of the ADTS 405 check the contents of the packaging against the following lists:
Standard Packaging List - ADTS 405F
i)
Flight line ADTS 405F
ii)
Accessory bag
Power supply cable 2m or 10m (regional plug
iii)
as per order)
iv)
Hand terminal (optional)
v)
Hand terminal cable - 2 m (optional)
vi)
Hand terminal cable - 18 m (optional)
vii)
User Manual K0572 (this publication)
viii) Kit, fuse/o-ring
ix)
Safety and Installation Guide 124M8686

2.2 Packaging for Storage or Transportation

WARNING
THE FLIGHT-LINE UNIT CAN BE MOVED BY USE OF THE HANDLE AND
WHEELS, BUT IF IT IS TO BE LIFTED, IT IS A TWO PERSON LIFT.
Environment
The optimum conditions for ADTS405 Mk2 equipment during transit, preparation for calibration and
repair and when being storage are detailed as below. Items in storage are defined as being non-
operational. If the ADTS becomes exposed to moisture or very high humidity, dry as soon as
possible and temporarily store in a low humidity area. The following conditions apply for storage or
shipping:
Temperature Range
Altitude
Procedure
1.
The unit should be at zero/ambient pressure.
2.
Disconnect all hose assemblies and stow them in the shoulder bag.
3.
Switch power OFF and disconnect from the electrical power supply.
4.
Disconnect the power supply cable and the hand terminal cable.
5.
Disconnect the hand terminal cable from the hand terminal.
© 2015 General Electric Company – All rights reserved.
Standard Packaging List - ADTS 405R
i)
Rack ADTS 405R
Power supply cable 2.5m (regional plug as per
ii)
order)
iii)
User Manual K0572 (this publication)
iv)
Input, hose, 15m, green, AN6 - open
v)
Input, hose, 15m, yellow, AN4 - open
vi)
Kit, fuse/o-ring
vii)
Plug, expansion port
viii) Safety and Installation Guide 124M8686
-51° to 70°C (-60° to +158°F)
Up to 50,000 feet (15,240 metres)
List of Parts
ADTS 405 Mk2 Instruction Manual-English | 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents