The DLP LightCrafter Display 3310 EVM is composed of three parts:
•
System board
•
DLP LightCrafter Display board
•
Engine with LED connections and Flex cables
The system board contains the connector for the power supply, a USB connector to communicate to the
DLP LightCrafter Display software, HDMI, and the connector for the DLP LightCrafter Display board. The
system board also contains a switch to turn on the projector in case the DLP LightCrafter Display board
and the engine are connected.
DLPU063 – January 2018
Submit Documentation Feedback
Figure 8-1
shows the main connectors on the system board.
DLP LightCrafter
Mini-HDMI
Mini-USB
Display Board
Connector
Connector
Connector
Figure 8-1. DLP LightCrafter Display System Board
Copyright © 2018, Texas Instruments Incorporated
5V Fan Power
TM
Projector
ON/OFF Switch
Chapter 8
DLPU063 – January 2018
EVM Setup
19V Power
Input
Connector
Connectors
13
EVM Setup