Canon Inner Finisher-K1 Service Manual page 90

■ Adjusting the Staple-Free Binding Position
<Use case>
• When the staple-free binding position in the staple-free binding mode.
<Procedure of adjustment>
NOTE:
After the setting value is changed, write the changed value in the service label.
1. Adjust the staple-free binding position by the following service modes.
• SORTER > ADJUST > FR-STP-X
Adjustment range: -15 to 15 (Unit: 0.1mm)
As the value is changed by 1, the staple position moves by 0.1 mm.
+:Toward the inlet side
-:Toward the delivery side
Feed Direction
Feed Direction
84
Feed Direction
-
+
5. Adjustment