Canon Inner Finisher-K1 Service Manual page 103

4.
Attach the Face Cover removed in step 2 to the Tray
Guide supplied for Host Machine.
NOTE:
Put the Face Cover away in somewhere of the positions
[2] to [4]. Do not put it away in the position [1] because it
is easy to come off from the position [1].
5.
[4]
[3]
[2]
[4]
[3]
[2]
[1]
CAUTION:
Store the tray guide supplied with the host machine to
the correct position shown in the figure. If the tray guide
is stored to the wrong position, the bottom stay of the
inner finisher will be deformed, so that the noise, the
stapling position failure or the error avoidance jam
(1C14) may occur.
97
7. Installation
Claw
Claw