Canon Inner Finisher-K1 Service Manual page 28

• Adjustment of alignment position (LTR):
SORTER > ADJUST > INF-ALG2
Related error code
• E537-8001: Front alignment motor error
• E537-8002: Front alignment motor error
• E530-8001: Rear alignment motor error
• E530-8002: Rear alignment motor error
■ Alignment Operation in Non-sort Mode
When the paper width is 297.0 mm or less (A4, LTR, etc.)
1. After the delivery sensor (PS1) detects the trailing edge of the paper, the front and rear alignment plates move to the wait
positions (paper width + 5 mm).
2. Move the front and rear alignment plates to align the paper (center alignment).
When the paper width is more than 297.0 mm (SRA3, 12X18)
End of Paper
+5 mm
Middle of Feeding Path
End of Paper
+5 mm
5 mm
Middle of Feeding Path
5 mm
Rear Alignment Plate
Front Alignment Plate
Rear Alignment Plate
Front Alignment Plate
22
2. Technical Explanation