Table of Contents
Advertisement
2. Loosen the 2 fixing screws of the alignment plate (front and rear), adjust the alignment plate as follows, and then
tighten the 2 screws.
• Front alignment plate: Fit the leading edge to the paper. The trailing edge make space of 1mm or less.
• Rear alignment plate: Align it with the paper in parallel.
2x
Front Alignment Plate
Fixing Screw
1.0 mm or less
3. Widen the rear alignment palte approx. 10mm.
4. Contact a sheet of paper with the rear alignment plate to check the gaps between the alignment plate and a sheet
of paper at [A] and [B] portion. In the case the gap is large, adjust the right-angle adjustment of alignment plate
again.
5. Widen the front alignment palte approx. 10mm.
2x
72
Paper
10 mm
Rear Alignment Plate
Paper
5. Adjustment
Fixing Screw
Rear Alignment Plate
[A]
[B]
Hide quick links:
Advertisement
Table of Contents
