1. After the delivery sensor (PS1) detects the paper, the front and rear alignment plates move to the wait positions (paper width
+ 20 mm and paper width + 5 mm, respectively).
2. Move the rear alignment plate to align the paper.
■ Alignment Operation in Shift-sort Mode
When the paper length is 215.9 mm or less (A4, LTR, etc.)
End of Paper
+5 mm
Middle of Feeding Path
End of Paper
+20 mm
25 mm
Middle of Feeding Path
Alignment Position
Rear Alignment Plate
Front Alignment Plate
Rear Alignment Plate
Front Alignment Plate
23
2. Technical Explanation