Measurement Or Input Functions - Presys PC-507-IS Technical Manual

PRG, FN and MEM are special features of the calibrator described in other
sections below.

3.4. Measurement or Input Functions

Select the type of signal to be measured by using the menus and use the
corresponding terminals:
a) IN Selects the input functions:
Press ENTER to select volt measurement; press , ,
another signal.
IN = x.xxxx V
C/CE
The remaining quantities follow the same selection process.
 V
mA
Pressure SW
Display indicates volt input in large digits.
Returns to the previous menu.
PROBE
NO
and
Page 20
to select