IMPORTANT INSTRUCTIONS:
This manual contains instructions for PC-507-IS (just called calibrator in the
rest of the manual) designed for use in hazardous areas. Read the entire
manual before using the calibrator.
Before using the calibrator carefully read the "Special Conditions for Safe
Use" section.
Whenever possible, keep the calibrator in a dry environment.
In case of failure or suspected failure, especially in the safe operation,
always send the instrument to the factory for repair.
When not in daily use, before starting up, let the calibrator turned on for at
least one hour.
EM0289-00 (14/12/2015) - Translated version of the document EM0234-03 (24/08/2015)
Page 1