COM - refers to the communication with the computer, described in an appropriate
manual.
EXEC - used to activate an input or output option which has been previously
selected.
CONF – shows the sub-menu:
CF changes both input and output temperature units from ºC to ºF and vice-
versa. It allows choosing the temperature scale between IPTS-68 and ITS-90. It
follows the encoding scheme described below:
ºC-90 ITS-90 temperature scale in Celsius degrees.
ºF-68 IPTS-68 temperature scale in Fahrenheit degrees.
OF - The calibrator incorporates energy saving resources (battery) through
the automatic power off option (auto-OFF). This option has the following sub-menu:
If NO is selected, the energy saving option is disabled.
If 5, 15 or 30 min is selected, the calibrator will turn off automatically after this
period if the keyboard is not used.
CF
PRG
FN
BT
NO
15MIN
MEM
OF
LCD
P
DT
5MIN
30MIN
Page 17