Table 9-3 Environment - Filtered For Residential, Commercial And Light Industry - Siemens MICROMASTER 411 Operating Instructions Manual

9 Electro-Magnetic Compatibility (EMC)
Environment: Filtered - for residential, commercial and light industry
This level of performance will allow the manufacturer / assembler to self-certify
compliance of their apparatus with the EMC directive for the residential,
commercial and light industrial environment as regards the EMC performance
characteristics of the power drive system. Performance limits are as specified in
the generic emission and immunity standards EN 50081-1 and EN 50082-1.
Table 9-3
EMC Phenomenon
Emissions:
Radiated Emissions
Conducted Emissions
Immunity:
Supply Voltage Distortion
Voltage Fluctuations, Dips, Unbalance,
Frequency Variations
Magnetic Fields
Electrostatic Discharge
Burst Interference
Radio Frequency Electromagnetic
Field, amplitude modulated
Radio-frequency Electromagnetic Field,
pulse modulated
NOTICE
MICROMASTER 411/COMBIMASTER 411 inverters are intended exclusively
for professional applications. Therefore, they do not fall within the scope of
the harmonics emissions specification EN 61000-3-2.
Class A filtered inverters can be used in this environment under "Restricted
Distribution" (Professional Applications) in accordance with EN61800 Part 3.
Dedicated EMC Product Standards can exist for this
equipment/units/machine/plant, which the manufacturer must then observe.
112
Environment - Filtered for Residential, Commercial and Light Industry
Standard
EN 55011
EN 55011
IEC 1000-2-4
(1993)
IEC 1000-2-1
EN 61000-4-8
EN 61000-4-2
EN 61000-4-4
ENV 50 140
ENV 50 204
MICROMASTER 411 & COMBIMASTER 411
Level
Level A (Restricted Distribution)
Level B
50 Hz, 30 A/m
8 kV air discharge
2 kV power cables, 2 kV control
80-1000 MHz, 10 V/m, 80% AM, power
and signal lines
900 MHz, 10 V/m 50% duty cycle, 200 Hz
repetition rate
Operating Instructions
6SE6400-5CA00-0BP0
Issue 03/01