Siemens MICROMASTER 411 Operating Instructions Manual page 8

Safety Instructions
NOTICE
Keep these operating instructions within easy reach of the equipment and
make them available to all users
Whenever measuring or testing has to be performed on live equipment, the
regulations of Safety Code VBG 4.0 must be observed, in particular § 8
"Permissible Deviations when Working on Live Parts". Suitable electronic tools
should be used.
Before installing and commissioning, please read these safety instructions and
warnings carefully and all the warning labels attached to the equipment. Make
sure that the warning labels are kept in a legible condition and replace missing
or damaged labels.
Transport & Storage
WARNING
Correct transport, storage, erection and mounting, as well as careful operation
and maintenance are essential for proper and safe operation of the equipment.
Use the lifting eyes provided if a motor has to be lifted.
Do not lift machine sets by suspending the individual machines! Always check
the capacity of the hoist before lifting any equipment.
Do not paint over the black case finish of the inverter, as this will affect the
unit's thermal performance.
CAUTION
Protect the inverter against physical shocks and vibration during transport and
storage. Also be sure to protect it against water (rainfall) and excessive
temperatures (see Table on page 94).
8
MICROMASTER 411 & COMBIMASTER 411
Issue 03/01
Operating Instructions
6SE6400-5CA00-0BP0