Introduction; Key Features; Applications - Advantech PCIE-1765 User Manual

1.1

Introduction

Advantech's PCIE-1765 is a 12-channel relay actuator card for PCIE bus. Built with
12 onboard SPDT relays, the PCIE-1765 card is ideal for applications such as device
ON/OFF control and power switching. Moreover, to ensure easy monitoring, each
relay is equipped with a red LED indicator to show its ON/OFF status.
The following sections of this chapter provide further information regarding the PCIE-
1765's features, installation procedures, software, and accessories.
1.2

Key Features

 12 form C-type relay output channels
 LED indicators to show activated relays
 Output status read back functionality
 Retains relay output values after system hot reset
 Board ID
Reset Protection Fulfills Requirements for Industrial Applications
When the system has undergone a hot reset (i.e., without turning off the system
power), the PCIE-1765 card can either retain the output values of each channel or
return to its default open configuration depending on its onboard jumper settings.
This function protects the system from malfunctioning during unexpected system
resets.
Plug-and-Play Functionality
The PCIE-1765 card is a plug-and-play device that fully complies with PCIE Specifi-
cations, Rev 2.0. During card installation, there is no need to set jumpers or DIP
switches. Instead, all bus-related settings, such as the base I/O address and interrupt
lines, are automatically configured with the plug-and-play function.
Board ID
The PCIE-1765 card features a built-in DIP switch that defines each card's ID when
multiple PCIE-1765 cards are installed on the same PC chassis. With correct Board
ID settings, users can easily identify and access each card during hardware configu-
ration and software programming.
1.3

Applications

 Industrial On/Off control
SMT/PCB machinery

Semiconductor machinery

Education and research

 External relay driving



PCIE-1765 User Manual 2