Table of Contents
Advertisement
Checking the Temperature functions and Cooking This setting detennines the thermostat setting for the
times
-
computer. Unlike conventional thermostats, once the com-
puter is set it will never need calibration. Set the desired
T
h k th ACTUAL te
tore
th
m
temperature by performing the following procedure.
10 c ec
e
mpera
press e
~
once.
~o check the SET tempe~re pres~ the
[::&J
key two Press the
ceJ
key followed by the
~
key. The new
bmes. After 5 seconds the display will return to normal. COOK temperablre may now be set using the numbered
To check the COOK, SHAKE and HOLD times JX'ess
r5l
keys. Pressing the ~
key two times at any point during
the f'(9I followed by the product key you wish to check.
.
oceed
.
11
th
nnaI
k
ode
~
thiS pr
UTe WI return you to
e no
coo
m
.
The times will be displayed in sequence followed
by a
short pause, finaly returning to the normal cook mode.
Level 2 ProKralDmine:
When the computer is calling for heat the two lights in
the lower comers of the
~
key will illuminate.
There are several features that merit mention at this point.
Their programming functions are explained along with
Proerammine Cook 11me. Shake Time and Hold
their descriptions.
Times:
To set the COOK time press the
ceJ
key then the
~
key. Enter the desired product key and change the de-
sired time by using the numbered keys. Press the ~
key to set the conesponding SHAKE time using the num-
bered keys. Press the
~
key to set the con'esponding
HOLD time using the numbered keys. Pressing the
ceJ
key two times at any point during this proceedure will
return you to the nonnal cook mode.
mode press the [eJ
To enter the level 2 programming mode press the
~
key followed by the
~
key. If a password has been set
you will be asked to enter it. if you do not re~mber
what the password is use "6684". This will allow you to
program these basic functions and reset the password.
To choose between "oF" or "OCtO press the
~
key and use
the
~
key to toggle between the options.
To set the PASSWORD option press the
~
key and use
the r!j key to toggle between the two options.
option press the ~ key aDd use
between the two options.
10
Advertisement
Table of Contents
