Shutting The Fryers Down; Operating The Computer Control - Pitco E12 Installation, Operating & Service Instructions

7. Close the GREEN drain valve and open the RED Return valve.
8. Return the oil to the fry tank. When air bubbles are present in
the fry tank turn the pump OFF.
9. Close the RED return valve.
10. Turn the fryer ON as described in the operation section.

SHUTTING THE FRYERS DOWN:

Press the Power switch to the OFF position.

OPERATING THE COMPUTER CONTROL:

To check the ACTUAL Temperature Press the
(After 5 seconds the display will return to the run
mode.)
To check the SET Temperature Press the
times. (After 5 seconds the display will return to the run
mode.)
To check the COOK, SHAKE or HOLD times press the
key. (The times will be automatically displayed in sequence, the display will return to the run mode.)
The BOIL mode will be automatically displayed when the computer senses a constant temperature of 100
ºC. This will only happen when water is in the machine during the Weekly Cleaning process. To cancel
the BOIL mode, turn the machine off and ON again. The computer will automatically exit the BOIL mode
when the oil temperature exceeds 100 ºC.
PROGRAMMING THE COMPUTER CONTROL:
To program the SET Temperature press
To return to the COOK mode at any time press
To set COOK TIME press
SHAKE TIME. Press
mode.
To enter the next level of programming press
SELECT will be displayed.
To change from ºF to ºC press
To set the PASSWORD option press
and NOPASS. When a PASSWORD is required press
To set the BEEPER VOLUME press
To set the LANGUAGE option press
To set the desired MELT CYCLE option press
& SOLID melt cycle options.
To view the RECOVERY TEST TIME press
To change CONTROL modes press
modes.
OPERATING THE DIGITAL CONTROL:
Press the key to turn the machine ON and OFF.
Press the key to start the Left Hand TIMER and BASKET LIFT (when installed.)
key two
and enter the desired Temperature.
and a PRODUCT KEY. Enter the desired time and press
again to set its HOLD TIME. Press
and enter the PASSWORD (if one is set). Press
and use to toggle between the options.
to display SET PASS and use
and use
and use
and use
and use
and use
4
Figure 2.
Red
Return
Valve
Green
Drain
Valve
Pump Switch
key
Filter Pan
key and the desired PRODUCT NUMBER
.
&
to toggle between PASREQ
and set the desired four digit password.
to toggle between the three available volume levels.
to toggle between the available options.
to toggle between the NO MELT, LIQUID
again to display the recovery data.
to toggle between COMPUTER and TIMER control
Red
Return
Valve
Indicator Light
to set its
to return to the COOK
and