Table of Contents
Advertisement
19. Disconnect the Filter Pick Up Assembly (#10) from
the Pump Suction Connection (#11) by grasping the
Filter Pick Up Assembly (#10) and pulling to the left
as shown.
20. Pull the Filter Pan (#14) out and remove the Filter
Pick Up Assembly (#10) from the pan. Unscrew the
large nut at the end of the Filter Pick Up Assembly
(#10) from the Pick Up Screen. Each piece may now
be washed with soap and water or in the dish washer.
21. When the parts are clean and dry they can be reas-
sembled by screwing the Filter Pick Up Assembly
(#10) onto the Pick Up Screen in a clockwise direc-
tion. Place the assembly in the bottom of the Filter
Pan (#14) and push the Filter Pan (#14) under the
fryer. Carefully place the Filter Pick Up Assembly
(#10) end into the Pump Suction Connection and
press together.
22. Turn the fryer on by pressing the
~
key on the
Digital Control (#15).
Your fryer is now ready to use.
The Turbofry 2(xx) has a Flush Hose feature that will
allow the user to wash down the inside of the fry tank.
The Flush Hose can also be used for pumping the oil into
a waste oil container when it is no longer usable.
CAUTION
The Flush Hose can discharge HOT oil. Use extreme
caution when handling! Never start the pump without
first ensuring that the hose is pointed in a safe direc-
tion.
Connect the Flush Hose to the Flush Hose Connec-
tor (#6) by pulling the black ring back on the quick
disconnecL Push the hose end onto the connection
I.f.
and release the black ring.
2. Drain the oil from the fry tank into the Lower Pan
(#14) by turning the Drain Valve Handle (#9) clock-
wise into the open position.
3. Pull the Pump Outlet Selector (#7) into the Flush
Hose position.
4. Pull the Pump Inlet Selector Knob (#17) into the
Lower Pan position.
5. Point the nozzle into the fry tank.
6. Turn the pump ON by pressing the Pump Override
Switch (#3) to the ON position. Use the Flush Hose
for the desired purpose. Turn the pump OFF by press-
ing the Pump Override Switch (#3) to the OFF posi-
tion.
7. When finished direct the end of the Flush Hose Nozzle
into the Lower Pan to prevent spilling.
CAUnON
The fitting where the flush hose attaches to the fryer
will be very hot after use. Use insulated rubber gloves
and extreme caution when handling.
Pull the black ring back on the quick disconnect and
release the Flush Hose connection. Allow all of the
oil in the Flush Hose to drain into the Lower Pan.
The Flush Hose should now be removed to its stor-
age location.
8. Press the Pump Outlet Selector (#7) until it stops.
9. Turn the Drain Valve Handle (#9) counter c]ockwise
to close the drain vaJve. Refill the fry tank by press-
ing the Pump Override Switch (#3) to the ON posi-
tion. When the Lower Pan (#14) is empty turn the
Pump Override switch OFF.
10. Press the Flush Hose Selector Knob INWARD.
Your fryer is now ready to use.
13
Advertisement
Table of Contents
