Table of Contents
Advertisement
O~ratin& the Dimtal Controller:
uid cooking media. 0 may be selected to bypass a Melt
Below is listed the control functions of the Pitco Digital
Cycle.
Controller:
key to turn the control
timers
Press theGeJ key to display the ACTUAL Temperature.
Press the
~
key a second time to display the SET
~
temperature.
ProlrBmming: the Dilital
Control:
Press the
lPJ
key to enter the program mode.
Once the program mode has been entered the display will
show the LH TImer setting[~:Em
An adjustment may
be made by using the
~
or
~
keys.
Press the 0
key again and the display will allow you
keys.
Press
0
again, the display will showa:5DBand
the
Set Temperature may be changed by using the
~
or
~
keys.
Press
0
again, the display will showlEE~and
the
Melt Cycle Options may be selected by using
~
or
~
keys. S may be selected to allow for a mild Melt
Cycle needed for Solid Shortening. L may be selected to
allow for a more aggressive Melt Cycle needed for Liq-
Press
0
again, the display will show
[[(:~
or
[[Q:E]
and the Password option may be set by using
~ or~.
If a PasswordRequ ired option is programmed
the Password
will be ~ ~ then ~ ~ and is not
ON. Press and
OFF.
key to start the Left or Right
adjustable.
Press 0
the display will show
agam,
[==0
and the Fahrenheit or Celcius option may be
~
CX'
~
keys.
chosen by usmg
Press
~
again and the display will return to the LH
1imer setting. To exit the Programming
press and hold
0
for three seconds.
The following messages may
at any time,
mode
also
be seen in the display:
[d~B
indicates the fryer is ready for cooking.
indicates the controller is in the heating mode.
Indicates the controller is in a Melt cycle.
9
Advertisement
Table of Contents
