Replacing The Controllers; Removing The Controller Front Panel Bezel - Pitco SSHLV Series Service Manual

Pitco SSHLV (ROV) Gas Fryers

5 Replacing the Controllers

5.1 Removing the Controller Front Panel Bezel

1. Remove the two (2) screws on the controller 3. Disconnect the controller wiring harness.
panel using a Phillips screwdriver. (on a Dual
unit you will need to remove the front panel
divider).
(For a dual unit- remove the front panel divider)
2. Pull out the controller panel front bezel.
L22-392 R1 19