Storing Preset Stations In Memory - Mw / Lw / Fm / Air; Storing Preset Stations In Memory - Sw Only - Sangean ATS-909X2J Operating Instruction

STORING PRESET STATIONS IN MEMORY – MW / LW / FM / AIR
Follow these steps to save preset stations on the MW, LW, FM and AIR bands:
1. Turn on the radio using the Power button
2. Select the desired waveband by pressing the corresponding button.
3. Tune to the station you want to store in the preset memory as described earlier.
4. Press the Memo button
The Memo indicator
the display.
5. To store the station at the first available position, press the Enter button
store the preset to that position.
To store the station to a different preset position:
6. Press the Page button
7. Press any of the numeric buttons
NOTE
If another station has already been stored at a preset position that is selected, then the
station that was previously stored at that preset position will be moved to the first available
empty preset position (even if that preset position is located on another page).
STORING PRESET STATIONS IN MEMORY – SW ONLY
The procedure for storing stations on the SW band is slightly different from the procedure for
the other bands described above. Follow these steps to store stations on the SW band:
1. Turn on the radio using the Power button
2. Select the SW band by pressing the SW button
3. Tune to the station you want to store in the preset memory as described earlier.
4. Press the Memo button
The Memo indicator
the display.
5. To store the station at the first available position, press the Enter button
store the preset to that position.
To store the station to a different preset position:
6. Use the Rotary Tuning knob
7. Now either press the Enter button
on that page or press any of the numeric buttons
S
corresponding preset position.
NOTE
If another station has already been stored at a preset position that is selected, then the
station that was previously stored at that preset position will be moved to the first available
empty preset position on the same page.
24
.
and the first available preset position
X
to select the desired page.
27
to save the station to the corresponding preset position.
19
24
.
and the first available preset position
X
or Tuning Up / Down buttons
16
to save the station to the first available position
30
10
.
10
.
20
.
18
to save the station to the
19
will now be blinking on
S
to confirm and
30
will now be blinking on
S
to confirm and
30
to select a page number.
JP
EN
51