Adding Idd Code To The Incoming Calls (Handset And Base); Adding External Mark To The Incoming Calls (Handset And Base); Adjusting The Lcd Light (Handset And Base); Selecting Ringer Tones (Handset And Base) - Siemens W10 User Manual

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Adding IDD code to the incoming calls
(handset and base)
Press the Mem/Prog key for 3 seconds
Press Channel/Select key till "Lo CodE" appears
Enter one digit of IDD code, which can be deleted by pressing
the Flash/Clear key.
Press Mem/Prog key for confirmation
Press Exit to exit
Adding external mark to the incoming calls
(handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until "Add" appears
Enter one digit of "9". (For example, you need to enter "9" for
placing outgoing calls. When placing an outgoing call, you must
enter "9" before dialing out.)
Press the Mem/Prog key for confirmation
Press Exit to exit
Adjust the LCD light (handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key till "LCD" appears
Press or to adjust the light
Press the Mem/Prog key for confirmation
Press Exit to exit

Selecting Ringer Tones (handset and base)

Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until "Ring" appears
Press or to select the ringer melody. (8 melodies)
Press the Mem/Prog key for confirmation
Press Exit to exit
9