Incoming Calls; Accepting Calls - Siemens pocket 2011 Tango Operating Instructions Manual

Cordless digital dect telephone system expandable to 6 handsets
Table of Contents

Advertisement

18.7.99

Incoming calls

Incoming calls

Accepting calls

8
KAP05.FM5
An incoming call is indicated by the ringer (bell symbol).
You will know that it is an external call when you the fol-
lowing message appears on your handset display
:
External call
RNG OFF
u
You can switch off the ring tone. Calls can be accepted as
RNG OFF
long as the call symbol is displayed.
You will know that you are receiving an internal call if you
see the following message on your handset display (the
example shows an incoming call from a second handset):
:
Internal call 2
RNG OFF
If the handset is in the charging unit:
Remove the handset from the charging unit. You are con-
nected.
If the handset is not in the charging unit:
c
Press the off-hook key on the handset. You are connect-
ed.
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
The automatic acceptance of calls by removing
the handset from the charging unit is an adjust-
able setting (
page 30). If you have switched
this function off, you must press the
when you have removed the handset from the
charging unit.
c
button

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset 2011 tango

Table of Contents