Technical Specifications - Siemens Simatic M7-400 Reference Manual

PROFIBUS DP Master Interface IM 467/IM 467 FO
8.4

Technical Specifications

8.4.1 Technical Specifications of the IM 467
6ES7467-5GJ02-0AB0.
Dimensions and Weight
Dimensions
W x H x D (mm)
Weight
PROFIBUS DP
•
Standard
•
Transmission rate
•
Transmission
technology
Current consumption
Current consumption from
the S7-400 bus (24 VDC)
The IM does not consume
any current at 24 V, and it
only makes this voltage
available at the MPI/DP
interface.
8-12
25 x 290 x 210
700 g
PROFIBUS DP,
EN 50 170
9.6 kbps to 12 Mbps,
parameterizable in steps
RS 485 via 9-pin
subminiature D female
connector
Total current consumption
of the components
connected to the DP
interfaces, with a maximum
of 150 mA
S7-400, M7-400 Programmable Controllers Module Specifications
PROFIBUS DP
Conditions of Use
Can be used in SIMATIC S7-400, max. 4
IM 467 in the central
controller
IM 467 cannot be used together with the CP 443-5
Supply voltage 5 VDC via the backplane
bus
Current consumption 1.3 A
•
From 5 VDC
Addressing range Max. 4 KB for inputs and 4
KB for outputs
DP master Yes
•
DPV 1 No
•
Enable/disable No
Number of connectable I/O 96
devices
(slaves)
Number of connections for 32 + 1 diagnostic
S7 functions for the connection
programming device and
operation and monitoring
Data volume per slave Max. 244 bytes
Consistency Max. 128 bytes
Configuration software STEP 7
DP slave No
Deviations from the DP Interface Integrated
in the CPU
•
Different SSL IDs for system diagnostics
•
Possibly extended SFC run times
•
Additional return codes for SFC 14 and
SFC 15
A5E00069467-07