Siemens Simatic M7-400 Reference Manual page 509

Programmable controllers module specifications
Hide thumbs Also See for Simatic M7-400:
Table of Contents

Advertisement

Addressing in the M7-300/400-Reserved I/O Address Ares
Regardless of possible addresses in the AT-compatible I/O address area, the
IF 962-COM interface submodule can be addressed in this reserved address area.
The base address depends on the interface submodule slot in the expansion
module or the programmable module. See the descriptions "M7-300 Expansions",
"M7-400 Expansions" or the description of the M7-400 programmable modules for
the slot-dependent base address of the interface submodule.
The I/O address is the sum of the base address and the offset address.
The registers and their meanings and the offset addresses are described below.
Table 13-10
Offset
Address
00
H
08
- 0F
H
H
10
- 17
H
H
18
- 1F
H
H
Configuration Register
The BIOS setup defines in which AT-compatible I/O address area the COM
interface is to be operated or whether it is only to be operated in the reserved I/O
address area and this information is stored in the configuration register.
Tables 13-11 to 13-13 give you an overview of the possible settings in the
configuration register.
Table 13-11
Offset
Address
00
H
Table 13-12
Bit 7
0
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
Offset Address Assignments for the IF 962-COM Interface Submodule
Function
Configuration register
UART 16C552 parallel port
COMa UART 16C552
COMb UART 16C552
Offset Address for the Configuration Register (IF 962-COM)
Function
Configuration register
Meaning of the Data Bits in the Configuration Register (IF 962-COM)
Bit 6
Bit 5
Bit 4
Addressing type COM b
Interface Submodules
Remarks
Read/write
Unused
Read/write
Read/write
Remarks
Read/write
Bit 3
Bit 2
Bit 1
0
Addressing type COM a
Bit 0
13-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic s7-400S7-400M7-400

Table of Contents