Submodule Ids And Insertion Rules - Siemens Simatic M7-400 Reference Manual

Interface Submodules
13.2

Submodule IDs and Insertion Rules

Submodule IDs
The following table contains an overview of the submodule IDs for the interface
submodules.
Table 13-2
Interface Submodule
Insertion Rules
The interface submodules cannot be operated in all submodule receptacles. The
following table shows the insertion rules for those interface submodules that cannot
be used in all receptacles:
Table 13-3 Insertion Rules for Interface Submodules that Cannot be Used in All Receptacles
Interface Submodule
IF 962-VGA
6ES7 962-1BA00-0AC0
IF 964-DP
6ES7 964-2AA00-0AB0
*)
Preferred slot for IF 964-DP if only one submodule is inserted, see Table 11-8 on page 11-40.
13-4
Overview of the Submodule IDs for the Interface Submodules
IF 961-AIO
IF 961-CT1
IF 961-DIO
IF 962-COM
IF 962-LPT
IF 962-VGA
IF 964-DP
Submodule Receptacle Numbers in the Following Modules
EXM 378-2 EXM 378-3
1 2 3
D D
–
D D
–
S7-400, M7-400 Programmable Controllers Module Specifications
Submodule ID
01
03
02
41
44
81
8C
CPU 486-3/
FM 456-4
CPU 488-3
4 5 0 1 0
D D D D D
D D D D D
H
H
H
H
H
H
H
EXM 478
3 all
D D
D D
*)
A5E00069467-07