Communications Cable Installation; Serial Cable; Usb Cable - Avery Dennison snap 500 Operator's And Service Manual

24

3.6 Communications Cable Installation

3.6.1 Serial Cable

Serial Port for Communication to Printer

3.6.2 USB Cable

Classification: Avery Dennison - Public
Use one of the following interface cable options:

Null-modem serial cable – Part number 05581139 connector

USB / Serial adapter – Part number 05581140

Ethernet adapter – Part number 05591105. ASUS, BCM, or Advantech
motherboards support the Ethernet port on the printer so the Ethernet
adapter is not required.

Locate the communication cable connectors on the backside of the printer
(see Figure 6).

Plug in the serial cable connection to the serial port.
The default serial port setup in the printer is 115,200 baud, no parity, 8 data bits,
1 stop bit.
USB or Ethernet cards (if installed)
Figure 6: Rear View of the Printer

Use either the USB option card if higher download speeds are required for
the extra expense of the option, or

USB to Serial adapter, if the USB connector is needed and serial download
speed is acceptable.
User's Manual—SNAP™ 500 Gen 1 and Gen 2
Auto Strapping
AC Connection for Power Cable
Power Switch