Internal Ethernet Print Server Module Installation (Option) - Avery Dennison M09416 XLI Service Manual

M09416
®
Thermal Direct Printer
2.13 Internal Ethernet Print Server Module Installation
(Option)
1. Break through the plastic partial tab at the rear side of lower cover to get the RJ45
interface opening.
2. Remove the screw from the main board. Fasten the copper pillar and plastic pillar.
Plastic pillar
3. Fasten the RJ45 connector daughter board upon the plastic and copper pillar. The
ground wire from the mechanism must be screwed on the daughter board at
copper pillar.
XLI
®
26
RJ45 interface opening
Remove the screw
Copper pillar