Ac Mains Connection - Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual

Installation
Actual configurations vary with unit types and optional
equipment.
2 2
Illustration 2.8 Motor, Mains and Earth Wiring for A-Frame Sizes
91
92
L1
L2
95
Illustration 2.9 Motor, Mains and Earth Wiring for B-Frame Sizes
and Above Using Shielded Cable
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
18
VLT
Operating Instructions
88
89 81
8
DC- DC+
R-
R+
93
96
97
98
L3
U
V
W
99
MG20M902 - VLT
®
AQUA Drive
91
92
L1 L2
95
- LC -
Illustration 2.10 Motor, Mains and Earth Wiring for B-Frame Sizes
and Above Using Conduit

2.4.4 AC Mains Connection

•
Size wiring based upon the input current of the
frequency converter. For maximum wire sizes see
10.1 Power-dependent Specifications.
•
Comply with local and national electrical codes
for cable sizes.
•
Connect 3-phase AC input power wiring to
terminals L1, L2, and L3 (see Illustration 2.11).
•
Depending on the configuration of the
equipment, input power will be connected to the
mains input terminals or the input disconnect.
Illustration 2.11 Connecting to AC Mains
®
is a registered Danfoss trademark
93
96
97
99
L3
U
V
W
99