Remote Programming With Mct 10 Set-Up Software - Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual

0,25-90 kw

Hide thumbs Also See for VLT AQUA Drive FC 202:

Table of Contents

About Frequency Converter P...

5.6 Remote Programming with MCT 10 Set-

up Software

Danfoss has a software program available for developing,

storing, and transferring frequency converter

programming. The MCT 10 Set-up Software allows the user

to connect a PC to the frequency converter and perform

live programming rather than using the LCP. Additionally,

all frequency converter programming can be done off-line

and simply downloaded to the frequency converter. Or the

entire frequency converter profile can be loaded onto the

PC for back up storage or analysis.

The USB connector or RS-485 terminal is available for

connecting to the frequency converter.

MCT 10 Set-up Software is available for free download at

VLT-software website. A CD is also available by requesting

part number 130B1000. For further information, see the

Operating Instructions.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

VLT

AQUA Drive

Operating Instructions

MG20M902 - VLT

is a registered Danfoss trademark

Table of Contents

Need help?

Do you have a question about the VLT AQUA Drive FC 202 and is the answer not in the manual?