Manual Configuration With The Hardware Configurator - Festo CPX-FEC Manual

3. General operation (Stand Alone)

3.1.4 Manual configuration with the Hardware Configurator

Deleting modules
3−10
Use this type of configuration if you wish to configure first
only on the PC when there is no connection to a CPX terminal.
Configuration is carried out with drag & drop:
1. Pull the modules out of the Hardware Catalogue into the
Hardware Configurator. You can pull the modules onto the
graphic representation of the CPX terminal or directly into
the configuration table.
Configure the modules from left to right corresponding to
the physical sequence in your CPX terminal.
2. The addresses will be assigned automatically in accord
ance with the default addressing.
Modifying addresses: Click directly on the address in the
configuration table and modify the value.
Mark the module to be deleted and press the Del"
·
button.
Festo P.BE−CPX−FEC−EN en 0404NH