LED
LED Color
USER1
Green
USER
Green
FPGA1
SD IN USE LED Indicators
LED Pattern
Solid
Off
Ethernet LED Indicators
LED
ACT/LINK
10/100/1000
Table 12. User LEDs
Use LabVIEW Real-Time to define the USER1 LED with the
RT LEDs VI. For more information about the RT LEDs VI, refer
to the LabVIEW Help.
Use the LabVIEW FPGA Module and NI-RIO Device Drivers
software to define the USER FPGA1 LED. Use the USER
FPGA1 LED to help debug your application or retrieve
application status. Refer to the LabVIEW Help for information
about programming this LED.
Table 13. SD IN USE LED Indicators
A microSD card is present and mounted.
No microSD card is present.
Table 14. Ethernet LED Indicators
LED Color
LED Pattern
—
Green
Flashing
Yellow
Green
—
Description
Indication
Off
LAN link not established
Solid
LAN link established
Activity on LAN
Solid
1,000 Mb/s data rate selected
Solid
100 Mb/s data rate selected
Off
10 Mb/s data rate selected
NI cRIO-905x User Manual | © National Instruments | 13
Indication