4. Commissioning
Fig. 4/10: Example Addressing with a CS31 central unit
Festo P.BE−VIFB5−03−EN en 0503e
The CS31 central unit ascertains the configuration of the
CS31 system bus when it is switched on and does not require
any settings for this.
Please note
With system flag KW 00,09, program processing can be
stopped until the specified number of I/O modules (incl.
valve terminals) exists on the CS31 system bus.
Example of addressing with the CS31 central unit
Address 20 is set in the field bus node. The valve terminal
occupies 2 CS31 bus addresses (28 + 4 input signals and 32
output signals).
4−23